Poly-Tex PT-30 - Manual (Page 18)

REV: AD-130626
2"
74"
POLY CURTAIN
LENGTH AS
REQUIRED
POLY CURTAIN
#12-14 x 1" SELF-
DRILLING SCREW
NB1809
ROLL-UP TUBE CF1014
INSTRUCTIONS
9. ASSEMBLE BOTTOM TUBE. SECURE WITH #12-14 x 1" SELF-
DRILLING SCREWS.
10. INSTALL ROLL-UP CURTAIN POLY. EXTEND CURTAIN POLY ABOUT
2" BEYOND HOOP AND APPROXIMATELY 2" ABOVE UPPER RAIL.
KEEP AS EVEN AS POSSIBLE. AFTER POLY IS SECURE, MEASURE
DOWN 74" FROM TOP RAIL AND PLACE A MARK ON THE POLY
USING A MARKING PEN.
11. USE THE MARK TO ALIGN ROLL-UP TUBE WHILE FASTENING TUBE
CLIPS. FASTEN CURTAIN TO TUBE USING CLIPS EVERY 3' KEEPING
TUBE STRAIGHT WITH MARKS.
TUBE CLIP
3 11/16"
MARK FOR
ROLL-UP TUBE