Otter Outdoors XT 650 Lodge - Manual (Page 3)

Page 3
6. Attach Back and Center main frame assemblies (Assembled in Step 5) onto frame brackets (Item 3 and 4).
Secure with 1/4 nylon hex lock nut (Item 20). Ref. Diagram 4.
4
3
3
Back Main Frame Assembly
Center Main Frame Assembly
20
Diagram 4
5. Assemble Back and Center Main Frame Bars: Insert the outer main frame bar (Item 13) into the middle main
frame bar (Item 14). Fasten with self-tapping screw (Item 16), plastic protector (Item 22) and star washer (Item
23). Slide the sleeve (Item 15) over the main frame extension bar (Item 11). (Line up holes with button lock,
press lock in as you slide over the bar). Insert the black plug (Item 17) into the main frame extension bar
(Item 11). Insert outer main frame bar (Item 13) into sleeve (Item 15). Cover end of main frame extension bar
(Item 11) with black end cap (Item 18). Ref. Diagram 3.
Diagram 3
17
13
15
Button lock
should face
inward
11
18
13
11
14
22
23
22
23
16
22
23
16
Important: Do
not overtighten to
prevent stripping
of threads.
16
Note: Use a light oil
such as WD-40 to
lubricate the poles to help
them slide easier. Wipe
off any excess. Silicone
may be substituted but is
not as effective.