Otter Outdoors Pro XT 1200 Resort - Manual (Page 4)

Page 4
6. Assemble Center Main Frame Bar: Insert the outer main frame bar (Item 15) into the middle main frame bar
(Item 14). Fasten with self-tapping screw (Item 17), plastic protector (Item 23), and star washer (Item 24). Slide
the sleeve (Item 16) over the main frame extension bar (Item 11). (Line up holes with button lock, press lock
in as you slide over the bar). Insert the black plug (Item 18) into the main frame extension bar (Item 11). Insert
outer main frame bar (Item 15) into sleeve (Item 16). Cover end of main frame extension bar (Item 11) with black
end cap (Item 19). Ref. Diagram 3A.
Diagram 3A
7. Attach Center main frame assembly (Assembled in Step 6) onto frame brackets (Item 3 and 4). Secure with 1/4
nylon hex lock nut (Item 21). Ref. Diagram 4A.
4
3
3
Center Main Frame Assembly
21
Diagram 4A
18
15
16
Button lock
should face
inward
11
19
15
11
14
23
24
23
24
17
23
24
17
Important: Do
not overtighten to
prevent stripping
of threads.
17
Note: Use a light oil
such as WD-40 to
lubricate the poles to help
them slide easier. Wipe
off any excess. Silicone
may be substituted but is
not as effective.