MoJack John Deere XD Lift - Manual (Page 9)

9
Assembly Instructions
Attach the Grip Handle to the Tower with
two Carriage Bolts and two Nylock Nuts .
Note: Fully tighten Nylock Nuts to secure
the handle to the tower.
STEP 4
Nylock Nut 15
Carriage Bolt 13
Tower 1
Grip Handle 7
7 1
13 15
Locked Position
STEP 5
Push in side of handle and
rotate from storage position to
the operating position. Allow to
seat into the locked position.
STEP 6
Insert the Lift Arm into the Carrier
and insert the Clevis Pin through the
hole in Carrier and lock by fastening the
Large Hair Pin to the Clevis Pin. 2
17
18
Large Hair Pin 18
Lift Arm 2
Carrier
Clevis Pin 17