Maintenance schedule – MoJack John Deere XD Lift User Manual
Page 21
21
• Before each use, always check for any worn,
loose or damaged parts on the jack. If any dam-
aged parts are present, do not use the jack and
contact MoJack at 1-877-575-3173.
• Clean and oil the entire screw thread after every
fifty (50) uses or at least once a year using light
machine oil.
• Place lithium grease between the Crank Handle
Base and the brass bearing after every fifty (50)
uses or once a year. Without weight on carrier, lift
the Crank Handle to create a small gap between
the brass bearing and the Crank Handle Base.
Use a small brush to apply the lithium grease
between the two surfaces.
• Spray grease or lube in Carrier Locking Handle
pivot after every fifty (50) uses or at least once
a year.
• Wipe clean and lightly apply grease to front and
back of Tower Assembly after every fifty (50) uses
or at least once a year.
• Store XD lift indoors.
Brass Bearing
Crank Handle
Base
Screw Thread
Carrier
Locking
Handle
pivot
Tower
Assembly
Maintenance Schedule