Melnor 3060 - Original - Manual (Page 9)

CREATING YOUR OWN WATERING SCHEDULE
In addition to the five pre-set schedules already in the unit, up to five user-set
schedules can be created and stored in the unit. Programming a custom water-
ing schedule is easy. Simply follow these steps.
Enter Create Schedule Mode
1. Press the SETUP key one time. The word “CREATE” will begin flashing.
2. Press the ACCEPT key one time to beginning programming.
Select the number of cycles you wish to water. One cycle will water once a
day, two cycles will water twice and so on.
3. Using the LEFT and RIGHT CURSOR keys, choose the desired num-
ber of watering cycles and press the ACCEPT key once. The unit will
automatically progress to the next step.
4. Enter the start time for the first watering cycle. Using the LEFT and
RIGHT CURSOR keys, first select the hour and press ACCEPT . Then
select the minutes and press ACCEPT .
5. In the same way, enter the stop time.
The timer will now flash an indicator beside Mist Cycle. For a full explanation
of the mist cycle and its benefits, turn to page 9.
6. The word “NO” will be flashing indicating no mist cycle. To proceed without
a mist cycle, simply press ACCEPT . If you wish to use a mist cycle, use
the LEFT and RIGHT CURSOR keys to choose the desired cycle and
then press ACCEPT .
6 6