Melnor 3060 - Original - Manual (Page 14)

Selecting User-Set Schedules
1. Press the SETUP key one time.
2. Press the RIGHT CURSOR key twice to move to USER SET and then
press ACCEPT .
3. The numerals corresponding to the programs you have entered will appear.
Using the LEFT and RIGHT CURSOR keys, choose the program you
wish to use and then press ACCEPT to activate it.
The timer will switch to AUTO mode and begin running the USER SET program
you selected.
REVIEWING SCHEDULES
1. Press the REVIEW key one time.
2. Use the LEFT and RIGHT CURSOR keys to choose which type of
program you wish to review, either PRE-SET or USER SET, then press the
ACCEPT
key.
3. Use the LEFT and RIGHT CURSOR keys to choose which program
you wish to review, then press ACCEPT .
4. By continuing to press the ACCEPT key you will be able to review the
various settings within the program.
5. When you reach the end of the program, the timer will return to step 3. You
can use the cursor keys to select another program to review or press the UP
CURSOR
key to return to AUTO mode.
Note: You cannot make changes during a review. To make changes, you must
create a new program in SETUP mode. You may then save the new program
replacing a previous one.
11