Melnor 3060 - Original - Manual (Page 6)

SETTING THE TIME, MONTH, DATE AND DAY OF THE WEEK
Enter Timeset Mode
If new batteries have just been installed, the unit is already in timeset mode.
Please skip forward to Set the Time.
1. Press SETUP one time.
2. Press the LEFT CURSOR key one time.
3. Press the ACCEPT key one time.
Your timer is now in timeset mode.
If you wish to program your timer using military time (24-hour clock), press
the UP CURSOR key one time immediately after entering timeset mode.
When the timer is in 24-hour mode, AM/PM will not be displayed.
Set the Time
Press the RIGHT CURSOR key to increase the value and the LEFT CURSOR
key to decrease the value when setting the time.
When the correct hour is entered, press the ACCEPT key one time.
The hour will be set and the timer will automatically advance to set the minutes.
Using the RIGHT and LEFT CURSOR keys set the correct minutes of the
hour and then press ACCEPT .
The time is now set and the timer will automatically advance to set the month.
Select the correct month and press ACCEPT
.
3