Melnor 3060 - Original - Manual (Page 11)

To water on specific days
1. After programming the Mist Cycle, the unit will begin flashing a small arrow
beside WATER DAYS. Press the RIGHT CURSOR key to begin choos-
ing days. “SU” (Sunday) will begin flashing. If you wish to water on
Sundays, simply press the ACCEPT
key and “SU” will become solid and
“MO” (Monday) will begin flashing. If you do not want to water on Sunday,
press the RIGHT CURSOR
key to move to Monday. You will notice the
“SU” disappears.
Continue in this fashion and program the remaining days. If you change
your mind, you can use the LEFT
and RIGHT CURSOR keys to move
to a day and change its setting.
2. The unit will proceed to USER SET (schedules). The numeral 1 will be blink-
ing. To save this program as program 1, simply press ACCEPT .
Otherwise, use the RIGHT CURSOR key to move to the numeral you wish
to use as a reference for this program, and press ACCEPT . You must
save the program. Otherwise, the program will run only once.
To skip watering days
1. After programming the Mist Cycle, the unit will begin flashing a small arrow
beside WATER DAYS. Press the ACCEPT key once and the small
arrow will move to the skip days area.
2. Use the RIGHT CURSOR key to select the number of days you want to
skip between waterings and then press the ACCEPT key.
8