Melnor 3025 - Manual (Page 7)

3) TO SET STOP TIME OF 1ST CYCLE
Press ᮤ or ᮣ to select Stop Time HOUR. Unit will beep one (1) time for each key press.
Holding down key will scroll numbers for faster selection.
Press Accept ▼ when desired Stop Time HOUR flashes.
Unit will beep one (1) time and minutes will flash.
Press ᮤ or ᮣ to select Stop Time MINUTES. Unit will beep one (1) time for each key press.
Holding down key will scroll numbers for faster selection.
Press Accept ▼ desired Stop Time MINUTES flash.
Unit will beep one (1) time.
If in 12-hour mode, press Accept ▼ after selecting proper AM/PM setting using ᮤ or ᮣ . Unit will go directly
to Start Time for next cycle if more than one cycle is desired. Repeat steps “2” and “3” above for each
additional cycle. After last cycle, unit will go to Skip Day mode and the arrow
ᮣ indicator will flash next to
“Skip Day” on left of screen. This step is skipped for 24-hour mode and unit will go directly to Start Time for
next cycle if more than one cycle is desired. Repeat steps “2” and “3” above for each additional cycle. After
last cycle, unit will go to Skip Day mode and the arrow
ᮣ indicator will flash next to “Skip Day” on left of screen.
4) TO SET SKIP DAYS
Press ᮤ or ᮣ to select Skip Days.
Choosing “NO” will repeat watering schedule every day.
Choosing “1” will repeat watering schedule second day.
Choosing “2” will repeat watering schedule third day.
Choosing “3” will repeat watering schedule fourth day.
Press Accept ▼ to choose desired skip day is flashing. Unit will beep one (1) time and go to the User Set
mode and the number “1” will be flashing with the first created schedule.
Press Accept ▼ to store schedule in flashing number. Timer will automatically select the next available
number (if any) up to 3. After 3, you must erase an existing schedule by selecting a user set number and
press Accept ▼. This will erase the existing shedule for that number.
ACCEPT
ACCEPT
ACCEPT
ACCEPT
3025 tri-Ling book.fa 2/7/00 9:19 PM Page 7