Melnor 3025 User Manual
Page 4
TO SET CLOCK
Setting the clock enables you to program customized watering schedules relative to the current time of day. After
installing batteries timer will go to timeset mode to set clock.
NOTE: To reset clock, press SETUP, unit will beep two (2) times.
Press
ᮣ
until TIMESET flashes.
Press Accept ▼.
12-HOUR VS. 24-HOUR CLOCK
Unit defaults to AM/PM (12-hour) mode, number “12” will flash.
If 24-hour clock is desired, press ▲. Unit will beep one (1) time. Number “13” will be flashing when unit is in
24-hour mode.
NOTE: Press ▲ to correct mistakes after pressing the Accept ▼ key. When ▲ is pressed, unit will beep one (1)
time and move back one step after each press.
TO SET HOUR
After selecting 12- or 24-hour clock (by pressing ▲).
Press
ᮤ
or
ᮣ
to select current hour. Unit will beep one (1) time for each press.
(Holding down keys will scroll numbers for faster selection.)
Press Accept ▲ when current hour flashes.
ACCEPT
ACCEPT
SETUP
3025 tri-Ling book.fa 2/7/00 9:19 PM Page 4