Lincoln Electric IM10007 POWER WAVE S350 - Manual (Page 28)

C-2 ACCESSORIES C-2
POWER WAVE ® S350
STICK OPTIONS
ACCESSORY KIT - 150 Amp
For stick welding. Includes 20 ft.
(6.1m) #6 electrode cable with lug,
15 ft. (4.6m) #6 work cable with
lugs, headshield, filter plate, work
clamp, electrode holder and sample
pack of mild steel electrode. For use with K2176-1
(Twist-Mate™ to Lug Adapter)
ORDER K875
ACCESSORY KIT - 400 AMP
For stick welding. Includes 35 ft.
(10.7m) 2/0 electrode cable with
lug, 30 ft. (9.1m) 2/0 work cable
with lugs, headshield, filter plate,
work clamp and electrode holder.
For use with K2176-1 (Twist-Mate™ to Lug Adapter)
ORDER K704
REMOTE OUTPUT CONTROL
Portable current control provides the
same dial range as the current control on
the welder. Consists of a 6-pin Amphenol
connector which plugs into the remote
control Amphenol. 25 foot cable length.
ORDER K857
ORDER K857-1 for 100 ft. (30 m)
STICK ELECTRODE HOLDER AND CABLE
ASSEMBLY
Includes 200A stick electrode holder and Twist-Mate
connector. 12.5 ft. cable length.
ORDER K2374-1
STICK ELECTRODE HOLDER CABLE AND WORK
CABLE ASSEMBLY
Includes 200A stick electrode holder, welding cable,
work clamp and Twist-Mate adapter.
ORDER K2394-1
TIG OPTIONS
Power Wave ® S350 Solenoid Kit
Mounts inside the back of the Power
Wave
® S350. Switches gas flow in the
Power Wave ® S350 through the Twist-
Mate™ connector. Includes gas hose and
solenoid ( only compatible with the
K2823-1 power source).
Order K2825-1
Pro-Torch™ TIG Torches
A full line of air-cooled and water-cooled torches avail-
able.
Request Lincoln publication E12.150
(See www.lincolnelectric.com)
Hand Amptrol ®
Provides 25 ft. (7.6 m) of remote cur-
rent control for TIG welding. (6-pin
plug connection)
Order K963-3
Foot Amptrol ®
Provides 25 ft. (7.6 m) of remote
current control for TIG welding. (6-
pin plug connection).
Order K870
Arc Start Switch
May be used in place of the Foot or
Hand Amptrol
® . Comes with a 25 ft.
(7.6 m) cable. Attaches to the TIG
torch for convenient finger control to
start and stop the weld cycle at the
current set on the machine.
Order K814
Twist-Mate™ Torch Adapter
For connection of Pro-Torch™ TIG torches (1 piece
cable) to power sources with gas passing through the
Twist-Mate™ connection. For use with K2825-1.
Order K1622-1 For air-cooled PTA-9 or PTA-17
torches.
Order K1622-3 For air-cooled PTA-26 torches.
Order K1622-2 For water-cooled torches.
Twist-Mate™ Torch Adapter
For connection of PTA-9 or PTA-17V torches (1 piece
cable) to power sources without gas passing through
the Twist-Mate™ connection.
Order K960-1