IEI Integration AFL-056A-LX v2.10 - Manual (Page 42)

AFOLUX LX Panel PC
Page 29
Panel mounting
Arm/Stand mounting
The four mounting methods are described below.
3.7.1 Wall Mounting
To mount the flat panel PC onto the wall, please follow the steps below.
Step 1: Select the location on the wall for the wall-mounting bracket.
Step 2: Carefully mark the locations of the four brackets screw holes on the wall.
Step 3: Drill four pilot holes at the marked locations on the wall for the bracket retention
screws.
Step 4: Align the wall-mounting bracket screw holes with the pilot holes.
Step 5: Secure the mounting-bracket to the wall by inserting the retention screws into
the four pilot holes and tightening them (Figure 3-4).
Figure 3-4: Wall-mounting Bracket