Figure 3-20: optical drive blank plate assembly, Figure 3-21: optical drive screws – IEI Integration PPC-37xxA-N26 v1.10 User Manual

Page 50

PPC-37xxA-N26 Panel PC

Page 34

Step 3:

Remove the four screws from the optical drive bracket assembly (Figure 3-20).

Remove the blank drive plate.

Figure 3-20: Optical Drive Blank Plate Assembly

Step 4:

Install the optical drive in the same position as the previously removed blank

optical drive plate. Fasten the same four screws to attach the optical drive to the

bracket.

Figure 3-21: Optical Drive Screws

Step 5:

Attach the SATA cable to the back of the optical drive.