beautypg.com

2 ppc-3710a-n26 hdd installation – IEI Integration PPC-37xxA-N26 v1.10 User Manual

Page 47

background image

PPC-37xxA-N26 Panel PC

Page 31

3.8.2 PPC-3710A-N26 HDD Installation

To install the HDD into the PPC-3710A-N26, please follow the steps below:

Step 1:

Remove the back cover

. See Section 3.5.

Step 2:

Remove the HDD bracket from the PPC-3710A-N26

. The HDD bracket is

attached on the panel PC with four retention screws inside the chassis

(Figure 3-16). Remove the four retention screws and lift the bracket off the

panel PC.

Figure 3-16: PPC-3710A-N26 HDD Bracket Retention Screws

Step 3:

Attach the hard drive in the bracket

. To do this, slide the hard drive onto the

bracket until it connects with the SATA connector at the back. Fasten the four

retention screws on the sides (Figure 3-17).

See also other documents in the category IEI Integration Computers: