Figure 3-11: rubber gasket and cable, Figure 3-12: reinstall the i/o cover – IEI Integration UPC-V312-D525 v1.02 User Manual

Page 47

UPC-V312-D525 Panel PC

Page 33

Step 4:

Remove some rubber rings from the gasket to make the gasket fit perfectly to

the size of the cable (Figure 3-17).

Figure 3-17: Rubber Gasket and Cable

Step 5:

Repeat steps to other connected cables.

Step 6:

Install the I/O cover and make sure each rubber gasket snaps into place tightly.

Figure 3-18: Reinstall the I/O Cover

Step 7:

Secure the I/O cover by the previously removed retention screws.