B.6.1 configure dhcp server settings – IEI Integration UPC-V312-D525 v1.02 User Manual

Page 155

UPC-V312-D525 Panel PC

Page 141

B.6.1 Configure DHCP Server Settings

Step 1:

Install the DHCP

#yum install dhcp

(CentOS, commands marked in red)

#apt-get install dhcp3-server

(Debian, commands marked in blue)

Step 2:

Confirm the operating system default settings: dhcpd.conf.

CentOS

Use the following command to show the DHCP server sample location:

#vi /etc/dhcpd.conf

The DHCP server sample location is shown as below:

Use the following command to copy the DHCP server sample to etc/dhcpd.conf:

#cp /usr/share/doc/dhcp-3.0.5/dhcpd.conf.sample /etc/dhcpd.conf

#vi /etc/dhcpd.conf

Debian

#vi /etc/dhcpd.conf

Edit “/etc/dhcpd.conf” for your environment. For example, add

next-server PXE server IP address;