IEI Integration uIBX-200 v1.02 - Manual (Page 24)

uIBX-US15WP Embedded System
Page 15
4.1 Installation Precautions
During installation, be aware of the precautions below:
ƒ Read the user manual: The user manual provides a complete description of
the uIBX-US15WP, installation instructions and configuration options.
ƒ DANGER! Disconnect Power: Power to the uIBX-US15WP must be
disconnected during the installation process, or before any attempt is made to
access the rear panel. Electric shock and personal injury might occur if the
rear panel of the uIBX-US15WP is opened while the power cord is still
connected to an electrical outlet.
ƒ Qualified Personnel: The uIBX-US15WP must be installed and operated
only by trained and qualified personnel. Maintenance, upgrades, or repairs
may only be carried out by qualified personnel who are familiar with the
associated dangers.
ƒ Air Circulation: Make sure there is sufficient air circulation when installing the
uIBX-US15WP. The uIBX-US15WP’s cooling vents must not be obstructed by
any objects. Blocking the vents can cause overheating of the uIBX-US15WP.
Leave at least 5 cm of clearance around the uIBX-US15WP to prevent
overheating.
ƒ Grounding: The uIBX-US15WP should be properly grounded. The voltage
feeds must not be overloaded. Adjust the cabling and provide external
overcharge protection per the electrical values indicated on the label attached
to the back of the uIBX-US15WP.