6 intel® amt setup procedure, Ntel, Etup – IEI Integration IMBA-C2160 User Manual
Page 86: Rocedure, Figure 4-19: vga connection, 6 intel, Amt setup procedure
IMBA-C2160 ATX Motherboard
Page 70
Figure 4-19: VGA Connection
Step 6:
Secure the connector. Secure the DB-15 VGA connector from the VGA
monitor to the external interface by tightening the two retention screws on either
side of the connector.
Step 0:
4.6 Intel
®
AMT Setup Procedure
The IMBA-C2160 is featured with the Intel® Active Management Technology (AMT). To
enable the Intel® AMT function, follow the steps below.
Step 1:
Make sure the DIMM socket is installed with one DDR3 memory.
Step 2:
Connect an Ethernet cable to the RJ-45 connector labeled LAN2.
Step 3:
The UEFI BIOS options regarding the Intel® ME or Intel® AMT must be enabled.
Step 4:
Properly install the Intel® Management Engine Components drivers from the
iAMT Driver & Utility directory in the driver CD. See Section 6.9.
Step 5:
Configure the Intel® Management Engine BIOS extension (MEBx). To get into
the Intel® MEBx settings, press