2 lan connection, 3 ps/2 keyboard/mouse connection, Figure 4-15: lan connection – IEI Integration IMBA-C2160 User Manual

Page 82

IMBA-C2160 ATX Motherboard

Page 66

4.5.2 LAN Connection

There are two external RJ-45 LAN connectors. The RJ-45 connectors enable connection

to an external network. To connect a LAN cable with an RJ-45 connector, please follow

the instructions below.

Step 1:

Locate the RJ-45 connectors. The locations of the USB connectors are shown

in Chapter 3.

Step 2:

Align the connectors. Align the RJ-45 connector on the LAN cable with one of

the RJ-45 connectors on the IMBA-C2160. See Figure 4-15.

Figure 4-15: LAN Connection

Step 3:

Insert the LAN cable RJ-45 connector. Once aligned, gently insert the LAN

cable RJ-45 connector into the on-board RJ-45 connector.

Step 0:

4.5.3 PS/2 Keyboard/Mouse Connection

The IMBA-C2160 has a PS/2 connector on the external peripheral interface panel. The

PS/2 connector is used to connect a keyboard or mouse to the system. Follow the steps

below to connect a keyboard or mouse to the IMBA-C2160.