beautypg.com

4 internal peripheral device connections, 1 sata drive connection, Nternal – IEI Integration IMBA-C2160 User Manual

Page 79: Eripheral, Evice, Onnections, Figure 4-11: wake-on lan connector pinout location

background image

IMBA-C2160 ATX Motherboard

Page 63

Figure 4-11: Wake-on LAN Connector Pinout Location

4.4 Internal Peripheral Device Connections

This section outlines the installation of peripheral devices to the onboard connectors.

4.4.1 SATA Drive Connection

The IMBA-C2160 is shipped with four SATA drive cables. To connect the SATA drives to

the connectors, please follow the steps below.

Step 1:

Locate the connectors. The locations of the SATA drive connectors are shown

in Chapter 3.

Step 2:

Insert the cable connector. Insert the cable connector into the on-board SATA

drive connector until it clips into place. See Figure 4-12.

See also other documents in the category IEI Integration Hardware: