beautypg.com

4 internal peripheral device connections, 1 sata drive connection, Nternal – IEI Integration IMBA-C2060 v1.03 User Manual

Page 76: Eripheral, Evice, Onnections

background image

IMBA-C2060 ATX Motherboard

Page 60

Figure 4-10: Wake-on LAN Connector Pinout Locations

4.4 Internal Peripheral Device Connections

This section outlines the installation of peripheral devices to the onboard connectors.

4.4.1 SATA Drive Connection

The IMBA-C2060 is shipped with four SATA drive cables. To connect the SATA drives to

the connectors, please follow the steps below.

Step 1:

Locate the connectors. The locations of the SATA drive connectors are shown

in Chapter 3.

Step 2:

Insert the cable connector. Press the clip on the connector at the end of the

SATA cable and insert the cable connector into the on-board SATA drive

connector. See Figure 4-11.

See also other documents in the category IEI Integration Hardware: