IEI Integration IMBA-G410 v1.01 - Manual (Page 90)

768/17/2011158
Page 76
IMBA-G410 ATX Motherboard
LAN
Super IO Watchdog Control [Disable]
Use the Super IO Watchdog Control option to enable or disable the watchdog function. If
the watchdog is enabled, the default setting is 50 seconds. The minimum value is 50
seconds, while the maximum value is 255 seconds.
Enable The watchdog function is enabled. Watchdog Timer
Duration option appears with the following option to
select:
50 seconds
100 seconds
150 seconds
200 seconds
255 seconds
Disable D EFAULT The watchdog function is disabled.
Serial Port1 Address [3F8]
Use the Serial Port1 Address option to select the base addresses for serial port 1
Disabled No base address is assigned to serial port 1
3F8 D EFAULT Serial port 1 I/O port address is 3F8
2F8 Serial port 1 I/O port address is 2F8
3E8 Serial port 1 I/O port address is 3E8
2E8 Serial port 1 I/O port address is 2E8
2D0 Serial port 1 I/O port address is 2D0
2D8 Serial port 1 I/O port address is 2D8
Serial Port1 IRQ [IRQ4]
Use the Serial Port1 IRQ option to select the interrupt address for serial port 1.