IEI Integration IMBA-G410 v1.01 - Manual (Page 45)

2011/8/172011/8/17
IMBA-G410 ATX Motherboard
Page 31
3.2.17 SPI Flash Connector
CN Label: JSPI1
CN Type: 8-pin header
CN Location: See Figure 3-18
CN Pinouts: See Table 3-18
The 8-pin SPI Flash connector is used to flash the BIOS.
Figure 3-18: SPI Flash Connector Location
Pin Description Pin Description
1 +3.3V 2 GND
3 CS# 4 CLOCK
5 SO 6 SI
7 NC 8 NC
Table 3-18: SPI Flash Connector
3.2.18 TPM Connector
CN Label: TPM1
CN Type: 20-pin header (2x10)
CN Location: See Figure 3-19
CN Pinouts: See Table 3-19