IEI Integration IEM-LX v1.10 - Manual (Page 76)

IEM-LX-800 ETX CPU Module
Page 60
CAS Latency [Auto]
Use the CAS Latency Time option to set the Column Address Strobe (CAS) delay time.
The following configuration options are available
Auto (Default)
1.5 nanoseconds
2.0 nanoseconds
2.5 nanoseconds
3.0 nanoseconds
3.5 nanoseconds
Interleave Select [LOI]
Use the Interleave Select option to specify how the cache memory is interleaved.
LOI (Default) Low order interleaving (LOI) of memory occurs
HOI High order interleaving (HOI) of memory occurs
Video Memory Size [8M]
Use the Video Memory Size option to determine how much memory is allocated to the
video graphics device. The configuration options are listed below.
None
8M (Default)
16M
32M
64M
128M
254M
Output Display [Panel & CRT]
Use the Output Display configuration to specify the display devices the system is
connected to. The following configuration options are available