IEI Integration IEM-LX v1.10 - Manual (Page 53)

IEM-LX-800 ETX CPU Module
Page 37
properly connected.
allow screws to come in contact with the PCB circuit, connector pins, or its
components.
5.2 Unpacking
NOTE:
If any of the items listed below are missing when the IEM-LX is unpacked,
do not proceed with the installation and contact the IEM-LX reseller or
vendor.
5.2.1 Unpacking Precautions
Before installing the IEM-LX, unpack the CPU module. Some components on IEM-LX are
very sensitive to static electricity and can be damaged by a sudden rush of power. To
protect it from being damaged, follow these precautions:
The user should ground them self to remove any static charge before
touching the IEM-LX. To do so wear a grounded wrist strap at all times or
frequently touch any conducting materials that is connected to the ground.
Handle the IEM-LX by its edges. Do not touch the IC chips, leads or circuitry if
not necessary.
Do not place a PCB on top of an anti-static bag. Only the inside of the bag is safe from
static discharge.
5.2.2 Checklist
When unpacking the IEM-LX, please make sure that the package contains the following
items.
1 x IEM-LX embedded module
1 x Mini jumper pack