IEI Integration IEM-LX v1.10 User Manual

Page 55

IEM-LX-800 ETX CPU Module

Page 39

SO-DIMM module

Mount the embedded module onto a baseboard

5.3.1 SO-DIMM Installation

WARNING:

Using incorrectly specified SO-DIMM may cause permanently damage

the IEM-LX-800. Please make sure the purchased SO-DIMM complies

with the memory specifications of the IEM-LX-800. SO-DIMM

specifications compliant with the IEM-LX-800 are listed in Chapter 2.

To install a SO-DIMM into a SO-DIMM socket, please follow the steps below and refer to

Figure 5-1.

Figure 5-1: SO-DIMM Installation

Step 1:

Locate the SO-DIMM socket. Place the IEM-LX-800 on an anti-static pad.

Step 2:

Align the SO-DIMM with the socket. The SO-DIMM must be oriented in such a

way that the notch in the middle of the SO-DIMM must be aligned with the

plastic bridge in the socket.

Step 3:

Insert the SO-DIMM. Push the SO-DIMM chip into the socket at an angle. (See

Figure

5-1)

Step 4:

Open the SO-DIMM socket arms. Gently pull the arms of the SO-DIMM socket