Avaya Sun Fire V880 User Manual
Page 93
Maintaining PCI cards
Issue 2.0 June 2004
93
23. Enter:
boot -r
This reboots the system so that it recognizes the new HSI/P card.
Note:
Note:
Sometimes the system fails to recognize a newly installed HSI card. If this
happens, the command show-devs does not show the HSI card and /
var/adm/messages
fails to recognize the card upon bootup. See the
troubleshooting chapter of Avaya Call Management System Switch
Connections, Administration, and Troubleshooting for information about
troubleshooting HSI/P cards.
24. When the system comes back up, log in as root.
25. Enter:
cfgadm
This displays the PCI card configuration after you add the card. Make sure that the
new card is displayed.
26. Administer the switch links as shown in