Avaya Sun Fire V880 User Manual
Page 171
Tools
Issue 2.0 June 2004
171
3. Enter:
probe-scsi-all
The program displays a message that is similar to the following:
Note:
Note:
The actual devices that are listed depends on the devices that are installed
in the system. This example shows six disk drives, the disk backplane, the
tape drive (target 5), and the DVD-ROM drive (target 6).
4. Fix any obvious errors, such as disconnected cables or external drives without power.
5. When you finish testing, enter the following commands:
!
CAUTION:
CAUTION:
If you fail to enter these commands, any reboots that you do in the future will
stop at the boot prompt instead of proceeding through the normal boot-up
process.
setenv auto-boot? true
boot -r
The system reboots.
/pci@8,600000/SUNW,qlc@2
LiD HA LUN
--- Port WWN ---
-----Disk description -----
0
0
0
21000004cf72f08f
SEAGATE ST373405FSUN3660438
1
1
0
21000004cf721553
SEAGATE ST373405FSUN3660438
2
2
0
21000004cf7213ea
SEAGATE ST373405FSUN3660438
6
6
0
508002000016b5b1
SUNW
SUNWGS INT FCBPL9224
3
3
0
21000004cf72114b
SEAGATE ST373405FSUN3660438
4
4
0
21000004cf7211ae
SEAGATE ST373405FSUN3660438
5
5
0
21000004cf7214a3
SEAGATE ST373405FSUN3660438
/pci@8,700000/scsi@1
Target 5
Unit 0
Removeable Tape
HP
C5683A
C005
Target 6
Unit 0
Removeable Read Only device
TOSHIBA DVD-ROM SD-M14011009
/pci@8,700000/pci@5/SUNW,1sptwo@4