Setting alarms, Setting alarm limits – ZOLL M Series Defibrillator Rev G NIBP User Manual
Page 17
Preparing to Take Measurements
ZOLL M Series Operator’s Guide - Option Insert
11
Setting Alarms
Before taking a measurement, ensure that all the NIBP alarms settings are appropriate for the
situation. See the M Series Operator’s Guide for instructions on setting alarms. When an NIBP or
heart rate alarm is triggered, the unit automatically initiates a single blood pressure measurement. See
the M Series Configuration Guide for instructions on how to enable/disable this automatic
measurement.
The M Series NIBP option includes blood pressure alarms for the following measurements:
* Neonatal and pediatric NIBP modes available on M Series CCT units only.
When the M Series unit is turned on, all alarm functions are disabled and the alarm limits are set to
their default values. Any changes to these settings remain in effect until either the settings are changed
or 10 seconds after the M Series unit is turned off. On M Series CCT units, you can configure the
default alarm limits at power-up according to patient type; see the M Series Configuration Guide for
more information.
Setting Alarm
Limits
You can change all the alarm limits using standard M Series procedures. See the M Series Operator’s
Guide for instructions on setting alarm limits.
You can set the alarm limits using the Auto function, or you can choose your own limits (see Table
4 on page 11). The Auto function sets the high limit to 30 mmHg (4.0 kPa) above and the low limit to
20 mmHg (2.7 kPa) below the last measurement.
Table 4 Alarm Limit Settings and Defaults
Patient Type
Alarm Parameter
Default Setting
Range (increments of 5)
Adult
Systolic
High
160 mmHg (21.3 kPa)
80-260 mmHg (10.7-34.7 kPa)
Low
90 mmHg (12.0 kPa)
40-140 mmHg (5.3-18.7 kPa)
Diastolic
High
110 mmHg (14.7 kPa)
50-200 mmHg (6.7-26.7 kPa)
Low
50 mmHg (6.7 kPa)
25-100 mmHg (3.3-13.3 kPa)
Mean
High
130 mmHg (17.3 kPa)
60-220 mmHg (8.0-29.3 kPa)
Low
60 mmHg (8.0 kPa)
30-120 mmHg (4.0-16.0 kPa)
Pediatric*
Systolic
High
145 mmHg (19.3 kPa)
80-160 mmHg (10.7-21.3 kPa)
Low
75 mmHg (10.0 kPa)
35-140 mmHg (4.7-18.7 kPa)
Diastolic
High
100 mmHg (13.3 kPa)
50-130 mmHg (6.7-17.3 kPa)
Low
35 mmHg (4.7 kPa)
20-100 mmHg (2.7-13.3 kPa)
Mean
High
110 mmHg (14.7 kPa)
60-140 mmHg (8.0-18.7 kPa)
Low
50 mmHg (6.7 kPa)
20-120 mmHg (2.7-16.0 kPa)
Neonate*
Systolic
High
100 mmHg (13.3 kPa)
60-130 mmHg (8.0-17.3 kPa)
Low
50 mmHg (6.7 kPa)
25-120 mmHg (3.3-16.0 kPa)
Diastolic
High
70 mmHg (9.3 kPa)
30-105 mmHg (4.0-14.0 kPa)
Low
30 mmHg (4.0 kPa)
20-100 mmHg (2.7-13.3 kPa)
Mean
High
80 mmHg (10.7 kPa)
35-110 mmHg (4.7-14.7 kPa)
Low
35 mmHg (4.7 kPa)
20-105 mmHg (2.7-14.0 kPa)