ZOLL M Series Defibrillator Rev M - Manual (Page 12)

M S ERIES O PERATOR ’ S G UIDE - O PTION I NSERT
SpO
2
- 10
Default Settings
When the pulse oximeter is turned on, the following default settings are automatically selected and remain in operation
until changed.
Note: Only the default settings are available in AED Semi-Automatic operation. Default alarm limit setting may be
adjusted in System Configuration mode. See the M Series Configuration Guide for more information.
SpO
2
Accessories
The following table describes each of the SpO
2
accessories.
Note: LNOP single use and reusable sensors are no longer available, but remain compatible with the M Series.
Parameter Default Setting Range
Averaging Mode 8 seconds (medium) 4 seconds (short)
8 seconds (medium)
16 seconds (long)
Sensitivity Normal Normal or High
High SpO
2
Alarm Limit OFF (appears as: ---) 50% to 100% or OFF
Low SpO
2
Alarm Limit 85% 50% to 100% or OFF
High Heart Rate Alarm Limit 150 bpm (beats/minute) 60 to 280 bpm (monitoring via ECG)
60 to 235 bpm (monitoring via Pulse Oximetry)
Low Heart Rate Alarm Limit 30 bpm 20 to 100 bpm
Item Description Part #
LNCS Adtx Single use sensor for patients > 30 kg 8000-0320
LNCS Pdtx Single use sensor for Pediatrics and Slender Adults 10 - 50 kg 8000-0321
LNCS Inf-L Single use sensor for Infants 3 - 20 kg 8000-0322
LNCS Neo-L Single use sensor for Neonates < 3 kg 8000-0323
LNCS NeoPt-L Single use sensor for Neonates < 1 kg (Pre-term) 8000-0324
LNCS DCI Reusable sensor for Adults and Pediatrics > 30 kg 8000-0294
LNCS DCIP Reusable sensor for Pediatrics 10 - 50 kg 8000-0295
LNC-4 4' Reusable Patient Cable 8000-0298
LNC-10 10’ Reusable Patient Cable 8000-0293
LNC Ext LNC Extension Cable, DB-9 Termination, 4ft 8000-0325
LNCS-to-LNOP Adapter Cable, LNCS Sensor to LNOP Patient Cable 8000-0327
LNCS DC-12 LNCS Adult Reusable Direct Connect 12’ Cable 8000-0296