ZOLL M Series CCT Defibrillator Rev D - Manual (Page 12)

6 ZOLL M Series Invasive Blood Pressure
Reading the Display
Pressure channels 1 and 2 each have their own data display area and waveform display area. Either
channel may be used for any type of pressure measurement (arterial, pulmonary arterial, central venous,
or intracranial).
The IBP Data display areas display the following information:
• Systolic blood pressure value.
• Diastolic blood pressure value.
• Mean blood pressure value.
• Alarm status.
• Unit of measurement.
The Trace display area (lower right quadrant of screen) displays three traces:
• Trace 1 - reserved for ECG.
• Trace 2 - Pressure channel 1 (or EtCO
2
, SpO
2
, 3 Lead ECG if selected).
• Trace 3 - Pressure channel 2 (or EtCO
2
, SpO
2
, 3 Lead ECG if selected).
See "Changing the displayed traces" on page 8 for further details.
To access most IBP features you must press a softkey with the proper softkey label (see Fig. 5).
NOTE Depending on the options included in your M Series, your front panel and display may slightly differ from
the illustrations in this insert.
Figure 5: M Series Display with IBP Option
Pressure Channel 1
(P1) Data Display Area
Softkey Labels
ECG Trace
Display Area
Trace 2 Display
Area (Pressure
Channel I)
Trace 3 Display
Area (Pressure
Channel 2)
Pressure Channel 2
(P2) Data Display Area
Heart Rate Value