ZOLL AutoPulse 100 - Manual (Page 81)

P/N 12555-001 Rev 3 Page B-5
User Guide
B.8 Multi-Chemistry Battery Charger Physical And
Environmental
Table B-6 Multi-Chemistry Battery Charger Specifications (Page 1 of 2)
Category Specifications
Manufacturer Manufactured for ZOLL Circulation
Model Number 8700-0753-01
Size (L
×
W
×
H) 16.01 in. by 9.50 in. by 6.54 in. (40.6 cm by 24.1 cm by 16.6 cm).
Weight 7.1 lbs. (3.23 kg)
Operating input voltage 100 to 240V AC
Operating input frequency 50/60 Hz
Input current 2.0 Amps (maximum)
Maximum Battery charge
time Less than 6¼ hours (at 77ºF [25ºC])
Fuses User-replaceable, T2.5A 250V AC (2 required)
Operating temperature +41º to +95ºF (5º to +35ºC) (68º to 77ºF [20º to 25ºC] preferred)
Storage temperature -40º to +158ºF (-40º to +70ºC)
Relative humidity 5% to 95%, non-condensing.
Operating altitude 0 to 10,000 ft. (0 to 3,048 m)
Enclosure protection Meets IP22 per IEC 60529
Shock Meets IEC 60068-2-27 Basic Environmental Testing Procedures – Shock (50g,
11ms pulse, half sine wave)
Vibration Meets IEC 60068-2-6 Basic Environmental Testing Procedures (10 to 150 Hz,
10 m/s
2
)
Meets IEC 60068-2-64 Basic Environmental Testing Procedures – Random
Vibration Broad Band – General Requirements (f1:20, f2:2000, ASD 0.05)
Free fall Meets IEC 60068-2-31 Basic Environmental Testing Procedures – Free Fall –
Procedure 1.
Electrostatic discharge Meets IEC 61000-4-2, Level 3
RF electromagnetic fields
immunity Meets IEC 61000-4-3, Level 2
EFT/burst Meets IEC 61000-4-4, Level 2
Surge immunity Meets IEC 61000-4-5, Level 2
Conducted RF disturbances
immunity Meets IEC 61000-4-6, Class A
Dips, interruptions, and
variations Meets IEC 61000-4-11