American DJ DMX-512 - Manual (Page 17)

AUTO RUN CHASES:
1. Select your desired chase by pressing any or all of the six
CHASE BUTTONS (FIG.5).
2. Press and release the AUTO/DEL BUTTON (FIG.8).
3. The corresponding LED will flash in the LCD DISPLAY (FIG.3)
indicating Auto mode is engaged.
4. Adjust the SPEED (FIG.13) and FADE (FIG.12) times to your desired
settings.
5. The chase will now run according to your set speed and fade
time.
Note: You can override the speed and by tapping the
TAP SYNC /DISPLAY BUTTON (FIG.11) three times, the chase would
then run according to the time interval of your taps.
Note: when Adjusting fade time never make it slower than the Speed
setting or your scenes will not be completed before a new step is
sent.
Note: If you want to include all the Chases PRESS AUTO/DEL BUTTON
before selecting Chase.
MUSIC RUN SCENES:
1. Press the MUSIC/BANK-COPY BUTTON (FIG.9) to turn on the
corresponding LED in the LCD DISPLAY (FIG.3).
2. Select the bank that holds the scenes you wish to chase by using
UP or DOWN BUTTONS (FIG.4), you may also use a MIDI controller
to change the scenes (see MIDI operation).
3. Press MUSIC/BANK COPY BUTTON (FIG.9) to exit.
MUSIC RUN CHASES:
1. Select your desired chase by pressing one of the six
CHASE BUTTONS (FIG.5).
2. Press and release the MUSIC/BANK-COPY BUTTON (FIG.9).
3. The corresponding LED will flash in the LCD DISPLAY (FIG.3)
indicating Music mode is engaged.
4. Chase will now run sound.
American DJ Los Angeles, CA 90058 - DMX OPERATOR User Manual