Warner Electric CBC-1550AHFC - Manual (Page 7)

7 Warner Electric • 800-825-9050 819-9050
Programming
View Presets and Values
The six function keys may all be viewed during the RUN mode. To view their values, press the desired
function key and the value is displayed with the corresponding display annunciator. The controller
process continues without interruption.
Press to display the current length or position (up to six digits).
Press to display the move preset (up to six digits).
Press to display the early warning preset (up to four digits).
Press to display the batch counter (up to six digits).
Press to display the batch counter preset (up to six digits).
Press to display the average braking distance (up to four digits).
1
COUNT
2
MOV PST
3
E.W.
6
BATCH
7
BCH PST
8
BRK DIS
Entering Presets
The three presets (MOV PST, E.W., and BCH PST) may also be changed during the RUN mode provid-
ed that programming line 7 (panel lock) is programmed "off". To edit, press the desired preset function
key, next press the EDIT key followed by the CLEAR key. Enter the new value using the numeric keys,
then press the EDIT key to exit the edit mode and to replace the existing value in memory. The CBC-
1000 will use the new number entered after the edit mode is exited.
Move
Preset
Press , then press , and press , now enter a new value using the numeric keys,
then press
or
Press , then press , and press or to change the value incrementally, Then press
Batch
Preset
Press ,then press , and press , now enter a new value using the numeric keys,
then press
Batch
Counter
To manually reset the batch counter: Press , then press
Reset
System
Home
To home the system: Press , then press
2
MOV PST
EDIT
RESET
CLEAR
EDIT
2
MOV PST
EDIT
EDIT
7
BCH PST
EDIT
RESET
CLEAR
EDIT
6
BATCH
RESET
CLEAR
1
COUNT
RESET
CLEAR