WARN 3000 ACI - Manual (Page 10)

PAGE 10 85366 Rev. A0
Wiring Instructions
WARNING
Shock Hazard
Failure to observe these instructions could lead to severe injury or death .

Always have the winch wired by a qualified electrician

Always wire the winch in accordance with all local building and electrical codes.

Always use properly grounded 115 / 230 V AC receptacle protected by a ground fault
circuit interrupter (GFCI).

Never operate this AC product in a wet environment.
Always have the winch wired by a qualified electrician and always wire the winch in accordance
with all local building and electrical codes.
Winch Motor
Refer to the wiring diagram on the winch motor housing for the proper way to wire the motor to either 115
volt or 230 volt AC power source. A copy of those instructions and diagrams are inserted below for reference.
Always defer to the actual diagrams that are on the winch motor and in the Drum Switch.