WansView NCL615W User Manual
Page 8
7
Figure 5
If visit IP Camera from WAN, you must do port forwarding on the router. Example of
figure 6.
Figure 6
Operation Steps:
1)
After login the interface of the router, choose “Port Forwarding”;
2)
Choose “Add custom Service”;
3)
Input IP camera http port;
4)
Input IP address of IP camera, click “Apply”.
After finishing the port forwarding, you can use WAN IP address of router and http port of
camera to visit the camera by remote computer as figure 5.
Notice: because the routers are different, so the interface and setting method of router
are also different, how to do the port forwarding for various routers, please refer to the
user manual of your router or consult with router manufacturer.