Alarmlog, Useranddevicesetting, Multi-devicesetting – WansView NCL615W User Manual
Page 14: 4 alarm log, Ser and device setting, 1 multi-device setting, 5 user and device setting

13
check your settings are correct or not.
Figure 17
Notice:For using the FTP function, you need to apply a user with authority that you can
write and create submenu and some memory space.
3.4.4 Alarm log
You can inquire when the device performs alarm in alarm log.
Figure 18
3.5 User and device setting
3.5.1 Multi-device Setting
As Figure 19, User can add maximum 9 devices to view video simultaneously. Click
“refresh” button to check the device in the LAN. When click a device, will popup setting
dialogue and enter the device info, and click “Add” to add device. After that, must click
“Setup” button to save device.