Vanguard EZCT-S2A - Manual (Page 22)

EZCT S2A USER’S MANUAL REV 1
18
When the testing is finished, the final results graph will be displayed:
Press any key on the keypad to continue.
l. The following screen will be displayed:
Press the [1] key (YES) if you would like to print the test results. The test results will be
printed on the thermal printer. A typical EZCT S2A tabulated test report printout is
shown in Figure 5. A typical graphic report is shown in Figure 6.
Press the
[2]
key (NO) if you do not want to print the test results.
m. The following screen will be displayed:
Press the
[1]
key (YES) to keep the test results.
KEEP THIS TEST?
1. YES
2. NO
print test results?
1. YES
2. NO