Vanguard ATRT-01_01B_01D - Manual (Page 24)

Model ATRT-01 (v) Operating Instructions
Rev 02
May 02, 2002
23
24.0 Enable Computer Interface
COMPUTER ITF MODE
*** CAUTION! ***
CABLE MAY HAVE VLTG
“STOP” TO ABORT
Figure 24-0. Select Computer Interface Display
a. Description: ATRT-01 testing can be remotely controlled via an IBM-compatible PC through an
RS-232C port. In this mode, the Transformer Analysis software provided with the ATRT-01 is
used to test transformer windings.
b. Origin: On the Start-up Menu (see Figure 16-0), press key 2 (SET UP); then, on the next
display, press key 2 (COMPUTER CONTROL) to show the COMPUTER ITF MODE display (the
ATRT-01 testing remains under computer control for as long as this screen displays).
c. Action Option: Press STOP to abort computer control and return to the Start-up menu.