Vanguard Auto-Ohm - Manual (Page 6)

Auto-Ohm Operating Procedures
2
2.0 AUTO-OHM SPECIFICATIONS
Auto-Ohm specifications and leading
particulars are listed in Table 1
.
Table 1. Auto-Ohm Specifications and Leading Particulars
MODEL ...................... Auto-Ohm
PART NUMBER.......... VIC-60000-S2
TYPE ............................. Special-Purpose Test Equipment, Portable, Low Resistance-Ohmmeter
CONFIGURATION...... Second-generation (improved design, superseding original model)
SIZE (inches) .............. 16.8 Wide by 12.6 High by 10.6 Deep
WEIGHT........................ Less than 21 pounds
RESISTANCE
RANGE ......................... 1 micro-ohm to 300 milliohms
TEST CURRENT
RANGE ......................... 10 Amperes to 100 Amperes, Selectable with
±2 ampere increment
DISPLAY ...................... Backlit LCD, 2-lines high by 16 characters Wide
ACCURACY................. ± 1 % Reading, ± 1 Count
OPERATING
POWER ........................ 8 amps, 90-132 Vac or 200-230 Vac (selectable), 50/60 Hz,
With 10A built in circuit breaker
UNIT PROTECTION... thermal-overload sensor and cutoff
INTERFACE................. RS-232C Connector Port for PC Interface
ENVIRONMENT .......... Operating: 0°C to 55°C; Storage: -40°C to 65°C
FURNISHED ITEMS... One power cord, one 35-ft. test lead cable, one test-cable carrying bag
WARRANTY ................ One-Year Parts & Labor (Post-Warranty Service Contracts Available)
AUTO-OHM SPECIFICATIONS ARE SUBJECT TO UPGRADES AND TO BEING CHANGED WITHOUT PRIOR NOTICE.