Alto-Shaam ASC-4G - Manual (Page 18)

O P E R A T I N G I N S T R U C T I O N S
A S C - 4 G G a s C o n v e c t i o n O v e n - E l e c t r o n i c C o n t r o l • 1 6
ቢ
ባ
ብ
ቦ
º
¹
¾
ƹ
ƻ
ቤ
ቧ
ቨ
ƺ
µ
Ƽ
Ƹ
¸
E L E C T R O N I C C O N T R O L
Press MAIN POWER Ƽ “ON.”
•The display ባ will alternate between last Cook Set
Temperature and actual Cavity Temperature.
•The oven will preheat to previous Cook temperature, and
the Preheat Indicator ቢ will illuminate.
•The fan operates at high speed “FnHi” during preheat.
A. If the previous Cook Cycle is acceptable, proceed
to Step B.
B. When the cook preheat temperature has been reached:
•The START Key ¹ and READY Indicator ቢ will flash.
•The control will produce an audible beep every 30 seconds.
LOAD PRODUCT IN A TIMELY MANNER.
If cooking by probe, remove probe from its bracket, wipe the
probe tip with a disposable alcohol pad and properly insert
probe into product.
CLOSE THE OVEN DOOR -- PRESS START KEY.
AFTER COOK CYCLE IS COMPLETE AND
PRODUCT IS READY:
• The display will indicate “DONE.”
• The START/STOP & READY indicators will flash, the
oven will beep every 30 seconds, and the fan will default to
low speed until the Start/Stop button is pressed.
REMOVE PRODUCT
promptly to avoid overcooking.
To terminate procedure, press START/STOP key twice.
Cook by Time or Probe
• Press COOK º
• Press lit TIME Key µ or PROBE Key ¾..
• Confirm fan speed.
• Adjust the cooking temperature
with the UP or DOWN arrow keys ቤ.
Note: Time
Indicator ብ will remain lit if cooking by time.
Probe
Indicator ቧ will remain lit if cooking by probe.
if more than 4-5 seconds elapse before a decision is
made, the mode button must be pushed again to continue.
To terminate beeping, press START/STOP key twice.
Cook by Time
•The display ባ will alternate between cook cycle temperature and
remaining cooking time when cooking by TIME.
Cook by Probe
•The display will alternate between set cooking temperature, probe
temperature, and elapsed time when cooking by PROBE.