Atlantis Land A02-RA ME01 - Manual (Page 41)

Chapter 3 Configuration
35
Dynamic Routing
The dynamic routing function of the router can be used to allow the router to automatically
adjust to physical changes in the network’s layout. The router uses the dynamic RIP protocol. It
regularly broadcasts routing information to other routers on the network. Choose the protocol ─
RIP1, RIP2, or RIP1+RIP2 ─ you want the router to use to transmit / receive data on / from the
network.
Static Routing
If you have another router with a LAN-to-LAN connection, you may create a static routing on
the router that is the gateway to Internet. After you check the “Enable” radio button, the
following figure will appear.