Atlantis Land A02-RA ME01 - Manual (Page 33)

Chapter 3 Configuration
27
Then, click “Upgrade” to start upgrading. When the procedure is completed, the router will reset
automatically to make the new firmware work.
Factory Setting
If for any reason you have to reset this I-STORM ADSL ROUTER factory default settings, be
careful that the current settings will be lost and the settings are reset back to its default state. The
factory default values is detailed in section 3.2 ‘‘Factory Default Settings’’.
Reboot
In case the device stops responding correctly or in some other way stops functioning, you can
perform the reboot. Your setting won’t be changed. Performing the reboot, click on the Reboot