Terk HDTVO_OMЙ - Manual (Page 16)

14
Connecting the HDTVo to a TV
1. Run the RG6 coaxial cable from the antenna towards your
television set and connect the RG6 coaxial cable to the supplied
Power Injector on the terminal labeled “TO ANTENNA”.
2. Connect the “TO TV” lead on the power injector to the “ANT IN”
on your TV.
3. Plug the Power Adapter from the Power Injector into a standard
AC outlet. Switch the Power Injector “ON” for amplification.
See Fig 7.
Splitting the Signal to Multiple TV’s
Follow the diagram to use the
HDTVo with more than one TV.
A splitter will be required
sold separately).
NOTE: The Power Injector
MUST be installed between
the HDTVo and the splitter.
Failure to do so could cause
a short circuit. The Power
Injector should always be
located indoors.
HD
TV
o
Fig 7.
TO TV
BSP-2
TO TV 1 TO TV 2
TO HDTVo
Splitter (such as the
Terk BSP-2)