Terk TV42_OMЙ - Manual (Page 3)

2
About your new TV42
outdoor TV antenna
The TV42 features an internal amplifier that minimizes signal
loss. The satellite receiver powers the amplifier, so no additional
power supply is required. Because TERK’s antenna elements are
manufactured to be weather-resistant, they’ll perform at their
best for many years to come.
For best reception results...
For the best reception results, the satellite dish and antenna
combination should be high off the ground with minimal signal
obstructions. On the side of your house (close to the roof), or on
the roof itself, generally offers the best environment for reception.
Remember, you can always rotate the antenna on the dish to
adjust your reception.
Before you begin
Please take a moment to familiarize yourself with the various
elements in the TV42 package. Please make sure that your
package includes all of the necessary pieces (see Fig 1). If you
believe your box is missing any pieces, please call TERK Technical
Support at 1(800) 942-TERK (8325).
How to install your new TV42 antenna
The TV42 installation consists of three basic steps:
1. Install and connect the TV42 antenna
2. Install the indoor diplexers
3. Set up your television set(s) to use the TV42
Please be sure to complete all of these steps before attempting to
watch local channels with your TV42.
TV42
TV SAT
TV/SAT
INSIDE DIPLEXER
TV SAT
TV/SAT
INSIDE DIPLEXER
(1) TV42 Antenna (2) Indoor Diplexers
(4) 12” Coaxial Cables
(2) 32” Coaxial Cables
(2) Security Clips
Fig 1