Teledyne LeCroy USB Chief - File Based Decode Manual - Manual (Page 30)

26
C OMPUTER A CCESS T ECHNOLOGY C ORPORATION USB D ESCRIPTOR D EFINITION (. DSC ) F ILES
Reference Manual
AllOffsets=
{
<Offset_value>=<Offset_name>
...
}
Offset(<Offset_value>)=
{
...
}
...
Entries
This section describes the basic entries that make up a .dsc file.
DescriptorName
The DescriptorName entry identifies the name for a descriptor definition. The
name is displayed in the Data field, as well as showing up at the top of the displayed
descriptor information.
DescriptorName=Example
DescriptorType
The DescriptorType entry is a numeric value that identifies a descriptor defi-
nition within in a .dsc file. It should match a wValue value in the corresponding
.req file’s GET_DESCRIPTOR definition. For example:
From standard.dsc:
DescriptorType=0x01
From standard.req ( GET_DESCRIPTOR definition):
wValue={
...
HIBYTE={
Figure 15: DescriptorName display