Sendallchannels(), Sendtraceevent (), Dontsendtraceevent() – Teledyne LeCroy SATracer 3G Verification Script Engine manual User Manual
Page 38: Sendtraceeventonly(), Hannels, Race, Vent, 10 s, 7 sendallchannels(), 8 sendtraceevent ()
LeCroy Corporation
Verification Script Engine Reference Manual
Version 1.01
8.7 SendAllChannels()
This function specifies that events that have occurred on ALL channels should be sent to the
script.
Format :
SendAllChannels ()
Example:
…
SendAllChannels (); # - send events from ALL channels
8.8 SendTraceEvent
()
This function specifies the events to be sent to the script.
Format :
SendTraceEvent( event )
Parameters: event – See
Verification Script Engine Events
Example:
…
SendTraceEvent(
_FRM_AF_OPEN
);
…
8.9 DontSendTraceEvent()
This function specifies that the event specified in this function should not be sent to script.
Format :
DontSendTraceEvent ( event )
Parameters: event – See
Verification Script Engine Events
Example:
…
if( SomeCondition )
{
DontSendTraceEvent(
_FRM_AF_OPEN
);
}
8.10 SendTraceEventOnly()
This function specifies that ONLY the event specified in this function will be sent to the script.
Format :
SendTraceEventOnly( event )
Parameters: event – See
Verification Script Engine Events
33