Teledyne LeCroy SFF-8639 to PCI Express 3.0 Adapter Quick Start - Manual

Introduction
Use this document for quick installation and setup.
Teledyne LeCroy’s SFF-8639 to PCI Express 3.0 Adapter card provides a quick
and simple means for test and debug of Solid State Drives (SSDs) based on PCI
Express (PCIe
®
) protocols. It supports data rates of 2.5 GT/s (Gen1), 5 GT/s
(Gen2) and 8 GT/s (Gen3). The Port B SFF-8639 Adapter looks exactly the same
as the Port A adapter except for the bracket label which reads
"Dual Port SFF-8639 to PCIe Adapter Port B". Functionally, the Port B SFF-8639
Adapter works up to X2 since only Lanes 0 and 1 are routed in the PCB from the
PCIe edge connector to the Port B of the SFF-8639 connector.
SFF-8639 Single-Port Adapter Card
SFF-8639 to PCI Express 3.0 Adapter
Quick Start
1
Components
The analyzer package includes the following components:
•
SFF-8639 single-port Adapter card
• Power supply 12V @ 3A
Inspect the received shipping container for any damage. Unpack the container
and account for each of the system components listed on the accompanying
packing list. Visually inspect each component for absence of damage.
In the event of damage, notify the shipper and Teledyne LeCroy. Retain all
shipping materials for shipper’s inspection.
2