Teledyne LeCroy PCIe Summit Z3-16 with CLKREQ Quick Start - Manual (Page 2)

4
Exerciser Card - Front
Power Socket: For the 12 V DC Power Adapter
USB Type B Host Machine Connector: Links an Exerciser to the host machine for the purpose of downloading scripts and controlling
the behavior of the Exerciser. Note: Use either USB or Ethernet, not both.
Ethernet Port: GIGE Connectivity allows connection to an Ethernet network and sharing of Analyzer/Exerciser resources by multiple
engineers. Note: Use either USB or Ethernet, not both.
Power LED: On/Off
x16 PCIe Edge Connector: Use the Edge Adapters to connect to x8, x4, or x1 slots.
Exerciser Card - Rear
Train LED: Indicates whether the link is TRAINED or not.
Transmitter and Receiver LEDs: 16 LEDs for Transmitting lanes and 16 LEDs for Receiving lanes, with Green = no error and Yellow =
error.
Speed LEDs: 3 LEDs indicate operating speed: 8 GT/s for Gen3, 5 GT/s for Gen2, and 2.5 GT/s for Gen1.
Shown here is an
example of the Summit
Z3-16 Exerciser inserted
into the PCI Express
Test Platform for Host
emulation.